ADJUSTABLE GAS PRODUCTION
The AquaCure AC50 allows people to easily and accurately VARY the gas output. This functionality is VITAL FOR SAFETY when making optimized hydrogen mixtures.

Most ‘other’ electrolyzers ‘out there’ do not have this essential feature.

The AquaCure model EA-H160 could safely vary its gas production, but its system (using a mechanical restriction valve) was clumsy because it was ‘inconvenient’ to accurately measure the gas output.

The AquaCure model AC50 made gas volume adjustment convenient and accurate with electronic buttons and display so that a person can KNOW EXACTLY how much HydrOxy is being produced… And this is VITAL, not only for safety but to individually optimize the effectiveness of all the HydrOxy protocols.

HydrOxy is 100% NON-toxic. There is nothing in the gas that is toxic.
WE WANT YOU TO BE SAFE! So we tell you the hard truths no one else will AND we design the AquaCure to be SAFE.

Mixtures of air that contain more than 4% hydrogen are potentially EXPLOSIVE. So the SAFE SOLUTION is to prevent a mixture that contains more than 4% hydrogen…

…The AquaCure AC50 is specifically DESIGNED to help you prevent a gas mixture that contains more than 4% hydrogen… yet set (optimize) the gas volume for OPTIMUM value.

Hydrogen has been proven beneficial in hundreds of scientific studies, the studies are usually done at 2% hydrogen in air; for safeties sake; and at 2% there is still a full therapeutic health benefit with NO negative side effects.

There is NO practical need to exceed 2% hydrogen in the inhaled breath. Once the blood is saturated, the body exhales almost as much as inhaled (the body just exhales the excess).

MOST other Hydrogen for Health options out there do NOT have gas volume adjustability and usually just limit gas production to less than optimal therapeutic value …

But ‘fixed gas production’ doesn’t address the issue that smaller beings (even infants) could also benefit from hydrogen supplementation and need FAR LESS hydrogen (for safety). They breath less air, so the hydrogen volume needs to be correspondently reduced!

The AquaCure Model AC50 can have FULL GAS PRODUCTION (50 lph) for all other applications / protocols AND then the gas production can easily and appropriately be reduced to keep the mixture breathed ‘non-explosive’ for any sized ‘mammal’.

VARIABLE FREQUENCY
One thing that current medical science is ‘re-discovering’ is that frequencies matter.
So for those who understand what frequencies will help ailments, we’ve added the (electronically controlled) ability to ‘impress’ frequencies onto the HydrOxy.

ANTI-BACKFILL
The AquaCure has an advanced ‘anti-backfill’ feature, that reliably prevents the water in the Humidifier and Drinking Water Bubbler from ‘back-feeding’ (getting sucked back) into the electrolyzer upon shutdown.
Many electrolyzers do not have this feature and/or the ‘feature’ isn’t reliable.
Backfilling isn’t ordinarily a ‘big problem’ in itself…
EXCEPT it can cause the AquaCure to be over-filled, resulting in lye ejection.

EXTRA RESERVOIR
We’ve added a ‘reserve’ tank to the machine, so it can operate for hours longer between ‘refills’. This is needed when using the AquaCure for applications requiring continuous use. At 100% gas production the AquaCure AC50 can go 10 hours on a fill; at 40% production, the AquaCure AC50 can operate over 24 hours on a fill.

TOWER CAP pre-scrubber
The main purpose of the Tower Cap is to prevent lye from leaving the AquaCure. It is ‘tall enough’ that the lye mist tends to settle out and (mostly) pure gas comes out of the top of the Tower Cap.
The Tower Cap also allows you to see if you have foaming, prevents ‘plugging’ and reduces maintenance. We’ve been using this ‘tower technology’ on our electrolyzers since 2007, based on research we did in 1996.

HUMIDIFIER (lye scrubber)
The function of the Humidifier is to filter out any residue of lye (NaOH) that comes out of the machine with the gas. It normally does a really good job. If there is not enough liquid or if it isn’t changed often enough, this function becomes compromised.

HOUR-METER
Even though we’ve designed the AquaCure for a 20+ year service life, all equipment needs regular maintenance. So we’ve included an hour-meter to make it easy to know when to do the maintenance rinsing, (about every 100 hours of use).

ADEQUATE GAS VOLUME
AquaCure Gas Volume is sufficient (~ 50 LPH) to ‘charge’ water quickly and supports the 6 protocols (including the potential of DDW water production, making NEW water and fueling the micro-torch).
You Can:
1. Bubble (infuse the water with HydrOxy) for healthful drinking and for feeding to plants and animals. Can also be used to enhance hydroponics, aquaponics, fish growth, etc.
2. Bubble (infuse the water with HydrOxy) for topical treatment of skin issues and wounds. Also bubble foot bath or bath water for full body treatment.
3. Bag limbs to use HydrOxy gas for external treatment of skin, wounds and various pain relief (like arthritis and carpel tunnel).
4. Direct BREATHING (inhalation) of HydrOxy gas (hydrogen / oxygen mixture), to efficiently put the hydrogen directly into the blood for fast, efficient whole body hydration.
5. We are developing the apparatus that will retrofit to ALL AquaCures, that will allow production of Deuterium Depleted Water (DDW). We do not yet have a specific time this option will be released.
6. There are ‘developing application’ protocols that use ‘NEW WATER’ that is generated by collecting the condensation of the HydrOxy flame. The AquaCure is designed to ‘make’ New Water (using the correct attachments). More on that subject will be introduced later; just note that the AquaCure is ALREADY DESIGNED for astonishing attachments to come.

TIMER/ON/OFF SWITCH
AquaCure has a timer switch, for convenience and efficiency. Treatments can be easily timed so no gas is produced beyond timing needed. It shuts itself off when you are finished.
The timer switch also has a ‘continuous’ setting, so that HydrOxy can be produced for extended times (until the low liquid level sensor shuts it off).
Note: As of August 2021, both the 120 VAC and the 240 VAC AquaCure AC50 have a custom made electronic timer switch.

MASTER SHUTOFF SWITCH
This switch completely shuts off power to the AquaCure. Most other electrolyzers only shut off the ‘power’ wire (like the timer switch would), leaving the neutral wire connected to the Grid. For safety, we shut off BOTH the power and neutral wires.
AquaCure has long life, reliable electrical and electronic components and electrolyzer chamber. Do NOT assume that because it ‘looks’ like a China VING, that it is a VING. It is significantly upgraded (at a cost several times higher than the VING retail).

SAFETY STANDARDS
AquaCure is built to CE safety standards, which I’ve then UPGRADED to pass CSA/UL and Australian safety standards.
Some manufacturers try to bypass this (expensive) certification by claiming that all components used are safety certified and while this is good (if true and includes the electrolyzer chamber too),

BENIGN ELECTROLYTE
AquaCure uses a lightly caustic electrolyte mixture designed to achieve practical efficiency with minimal foaming and to promote long internal plate life.
(about 3 ounces (80 grams) of lye in about a quart (1 liter) of water). This mixture IS technically caustic but can be safely used if appropriate care is taken. It’s about as caustic as strong dish soap.

PHYSICAL DETAILS
Due to (present) manufacturing development and market studies, shipped product may look slightly different from depicted.
SKU ER1-D1-0010,
26 lbs (shipping weight), 18″Lx16″Wx14″H (shipping box size),
The AquaCure itself is about 12 inches high (excluding the 10 inch Tower Cap), 12 inches long and 9 inches wide and weighs about 16 lbs in operation.